Part Number
PRX+4800
Contact Form
A
Switch Configuration
SPST
Revision
F

Electrical Specifications

Power   200 W (max)
Voltage Switching 50 VDC (max)
Breakdown 50 VDC (min)
Current Switching 3 Amp (max)
Carry 5 Amp (max)
Resistance Initial Contact Resistance 1 Ohm (max)
Insulation Resistance 1E11 Ohm (min)
Capacitance Contact 1.1 pF (typical)
Temperature Operating  TO + 125 °C
Storage -40 TO + 125 °C

Physical/Operational Specifications

Enclosure Material   Plastic
Operate Time Including Bounce 3 mSeconds (max)
Release Time   1 mSeconds (max)
Housing Volume Excluding Connection 40.8 cc-Nominal
Must Operate Distance 0.375 Inches
Must Release Distance 0.75 Inches
Wire Gage   16 AWG
Wire Stranding   19x29x
Wire Type   SAE J1128 Type GXL
Wire Type 2   XLPE
Shape   Rectangular
Height   17.45 mm
Length   78.87 mm
Width   41.15 mm

Features

  • * Switching Voltage up to 200 Volts
  • Non Physical Contact Activation
  • Zinc Plated Leachant Seal Steel Housing
  • Tungsten contacts
  • Hermetically sealed contacts
  • RoHS Compliant

Advantages

  • Can be mounted on ferrous metal
  • Component suitable for use in engine compartments in surface vehicle electrical systems of automobiles, boats, buses, RV's and trucks
  • Custom sensitivity and configurations available
  • Not ESD sensitive
  • Extended operations in extreme environments

Certifications

  • RoHS

Notes 5

  1. Specifications are not constant across entire magnetic range.
  2. Customer must exercise care in handling and mounting to prevent damage to internal components and subsequent changes to sensor performance.
  3. For information about performance, custom configuration (i.e. wire length or color; connectors; operational variation), or packaging contact our Sales department.
  4. Information contained hereon is for informational purposes only and should not be deemed as accurate for a specific application. Consult factory for specific application information and/or latest revision.