Part Number
PRX+2440
Contact Form
A
Switch Configuration
SPST
Revision
A

Electrical Specifications

Power   0.25 W (max)
Voltage Switching 30 VDC (max)
Breakdown 80 VDC (min)
Current Switching 0.01 Amp (max)
Carry 0.7 Amp (max)
Resistance Initial Contact Resistance 1 Ohm (max)
Insulation Resistance 1E11 Ohm (min)
Capacitance Contact 0.7 pF (typical)
Temperature Operating -40 TO + 125 °C
Storage -40 TO + 200 °C

Physical/Operational Specifications

Operate Time Including Bounce 0.3 mSeconds (max)
Release Time   0.2 mSeconds (max)
Housing Volume Excluding Connection .007 cc-Nominal
External Connection   Alloy 52 Bars / Gold Plated
Must Operate Field Strength 3.5 mT
Must Release Field Strength .75 mT
Height   1.27 mm
Length   6.25 mm
Width   1.52 mm

Features

  • Hermetically sealed contacts
  • Plaskon S-7 overmold material
  • No electrical power required to operate
  • Lowest profile magnetic contact sensor
  • External gold plating
  • RoHS compliant

Advantages

  • Not ESD sensitive
  • Pick-and-place capable
  • Medical implantable grade available
  • Custom sensitivity & configurations available

Certifications

  • RoHS compliant

Notes 8

    1. Specifications are not constant across entire magnetic range. Specifications are for informational purposes only and should not be deemed as accurate for a specific application. Consult factory for specific application information and/or latest revision.
    2. Customer must exercise care in handling and mounting to prevent damage to internal components and subsequent changes to sensor performance.
    3. The overmold is to facilitate handling and pick and place operations. The surface finish and texture may vary, small voids are acceptable.
    4. Sensitivity may change with series I.D.
      Example: PRX+ 2440-0001
      Must Operate: 3.75 mT
      Must Release: 1.50 mT