|Power||0.5 W (max)|
|Voltage||Switching||30 VDC (max)|
|Breakdown||80 VDC (min)|
|Current||Switching||0.01 Amp (max)|
|Carry||0.7 Amp (max)|
|Resistance||Initial Contact Resistance||0.75 Ohm (max)|
|Insulation Resistance||1E11 Ohm (min)|
|Capacitance||Contact||0.7 pF (typical)|
|Temperature||Operating||-40 TO + 125 °C|
|Storage||-40 TO + 200 °C|
|Pull - In Range||2-15 Ampere Turns|
|Test Coil||Coil 1 NARM RS-421-A|
|Operate Time||Including Bounce||0.3 mSeconds (max)|
|Release Time||0.2 mSeconds (max)|
|Housing Volume||Excluding Connection||0.007 cc-Nominal|
|External Connection||Alloy 52 Leads / Tin|
- Specifications are not constant across entire magnetic range. Specifications are for informational purposes only and should not be deemed as accurate for a specific application. Consult factory for specific application information and/or latest revision.
- Customer must exercise care in handling and mounting to prevent damage to internal components and subsequent changes to sensor performance.
- The overmold is to facilitate handling and pick and place operations. The surface finish and texture may vary, small voids are acceptable.
- Pull-in range is the initial, pre-modification spec