Part Number
Contact Form
Switch Configuration

Electrical Specifications

Power   0.05 W (max)
Voltage Switching 30 VDC (max)
Breakdown 80 VDC (min)
Current Switching 0.01 Amp (max)
Carry 0.7 Amp (max)
Resistance Initial Contact Resistance 0.75 Ohm (max)
Insulation Resistance 1E11 Ohm (min)
Capacitance Contact 0.7 pF (typical)
Temperature Operating -40 TO + 125 °C
Storage -40 TO + 200 °C

Magnetic Specifications

Pull - In Range   2-13 Ampere Turns
Test Coil   Coil 1 NARM RS-421-A

Physical/Operational Specifications

Operate Time Including Bounce 0.30 mSeconds (max)
Release Time   0.20 mSeconds (max)
Housing Volume Excluding Connection 0.007 cc-Nominal
External Connection   Alloy 52 Leads / Tin
Height   1.12 mm
Length   25.30 mm
Width   1.57 mm


  • Hermetically sealed Rhodium contacts
  • No electrical power required to operate
  • Plaskon S-7 overmold material
  • Materials are Lead Free and RoHS compliant


  • Pick and place capable
  • Medical implantable grade available
  • HI-Rel versions available
  • Not ESD sensitive


  • RoHS Compliant

Notes 10

    1. Specifications are not constant across entire magnetic range. Specifications are for informational purposes only and should not be deemed as accurate for a specific application. Consult factory for specific application information and/or latest revision.
    2. Customer must exercise care in handling and mounting to prevent damage to internal components and subsequent changes to sensor performance.
    3. The overmold is to facilitate handling and pick and place operations. The surface finish and texture may vary, small voids are acceptable.
    4. Pull-in range is the initial, pre-modification spec