Part Number
Contact Form
Switch Configuration

Electrical Specifications

Power   10 W (max)
Voltage Switching 200 VDC (max)
Breakdown 400 VDC (min)
Current Switching 0.5 Amp (max)
Carry 2.7 Amp (max)
Resistance Initial Contact Resistance 0.15 Ohm (max)
Insulation Resistance 1E11 Ohm (min)
Capacitance Contact 0.9 pF (typical)
Temperature Operating -40 TO + 125 °C
Storage -40 TO + 200 °C

Magnetic Specifications

Pull - In Range   15-40 Ampere Turns
Test Coil   Coil II NARM RS-421-A

Physical/Operational Specifications

Capsule Volume Excluding Leads 0.1 cc-Nominal
Contact Material   Rhodium
Operate Time Including Bounce 0.7 mSeconds (max)
Release Time   0.2 mSeconds (max)
Glass Length   19.69 mm


  • Hermetically sealed contacts
  • Unique blade design and surface finish
  • Switch materials are Lead free and RoHS compliant


  • Q measurement at least 60% of pure Copper wire
  • Insertion Loss < 0.01dB up to 30MHz
  • Rf Isolation > 50 dB up to 30 MHz
  • Very good RF performance up to 30 MHz
  • Extended operations in extreme environments
  • Not ESD sensitive


  • RoHS

Notes 1

  1. Specifications are not constant across entire magnetic range.
  2. Customer must exercise care in handling, mounting, lead forming, and cutting to prevent damage to glass capsule and/or switch sensitivity.
  3. For information or custom configurations about performance, mounting options or packaging, contact our Sales department.
  4. Information contained hereon is for informational purposes only and should not be deemed as accurate for a specific application. Consult factory for specific application information and/or latest revision.